Email Dan Luig at ddl23@drexel.edu with Gerber files or if you have any questions.
Printed Circuit Board Information
Company: LPKF Laser & Electronics
Model: ProtoMat S62
Website: www.Ipkfusa.co
PCB Limitations
- Largest Board Size – 8″ x 11″
- Layers – Single or double sided *
- Smallest trace width – 12 mil
- Smallest insulation – 8 mil
- Smallest drill diameter – .5 mm
- Silkscreen – Not available
- Solder Mask – Not available
*NOTE*: If possible, please use single sided. Through hole plating is available, but it will extend the turn around time. Minimum via size is .6mm.
Hole sizes for manual via punching:
| If you Need: |
.6 mm |
.8 mm |
1 mm |
1.2 mm |
| Holes Must be: |
.9 mm |
1.1 mm |
1.5 mm |
1.7 mm |
Please keep in mind that your pads must be bigger than your holes